PetroWrap Anti-Corrosion Tape

The PetroWrap Anti-Corrosion System has been developed for long term protection of metal surfaces that are underground, underwater, or exposed – even in the most severe environments.
It consists of a cold applied system of petrolatum-based PetroWrap Anti-Corrosion Tape, PetroWrap Primer, and, where contouring is necessary, PetroWrap Mastic. PetroWrap adheres to surfaces without heating, even on damp and/or indifferently prepared areas.

ISSA Code Width Length Weight (lb) Weight (kg)> Rolls/Box
81 24 71 50 mm (2″) 10 m (32.8′) 55 lb 25 36
81 24 72 100 mm (4″) 10 m (32.8′) 55 lb 25 18
81 24 73 150 mm (6″) 10 m (32.8′) 55 lb 25 12
81 24 74 200 mm (8″) 10 m (32.8′) 49 lb 22 8

PetroWrap Calculation Charts: Download

The System

assembly

  1. PetroWrap Primer Paste is a preparatory primer that displaces moisture, pacifies oxides, and fills small irregularities that occur on the surface to be wrapped with PetroWrap Anti-Corrosion Tape.
  2. PetroWrap Mastic is a cold applied filler which profiles areas to be tape wrapped by easing contours on pipe joints, flanges, bolts, and other irregular shapes to be wrapped with PetroWrap Anti-Corrosion Tape.
  3. PetroWrap Anti-Corrosion Tape consists of a non-woven, stitch bonded, synthetic fabric which has been fully impregnated with neutral petrolatum based compounds and inert fillers.
  4. PetroWrap Overwrap is a 12 mm thick tough adhesive tape. It is available in 50 mm and 100 mm widths.

Specifications

  • Can be applied on wire-brushed surfaces
  • Repels water, salt, alkalis and acids
  • Protects new or corroded surfaces
  • Temperature variances -40°C to +84°C
  • Will not crack, peel or harden
  • Non-toxic and environmentally friendly (Meets AWWA C217 Standard)
  • PetroWrap Anti Corrosion System CSA Z245.30 compliant

Applications

  • Steel pipes, flanges and valves
  • Welded pipe joints
  • Cooling tower piping
  • Pipe crossings
  • Tank bases
  • Waterproofing & sealing
  • Fire protection
  • Pipe & sprinkler systems
  • Electrical connection boxes
  • Cable splices
  • Hydraulic pipes, valves & fittings
  • Marine pilings

Application Instructions

  1. Remove all contaminants such as dirt, oil, scale and excessive moisture.
  2. Brush Petrowrap Primer A evenly over surface to displace remaining moisture and ensure proper adhesion.
  3. Press Petrowrap Mastic B into surface irregularities to eliminate air pockets.
  4. Wrap Petrowrap Tape C spirally around prepared surface using even tension. An overlap of 55% is recommended to assure total protection.
  5. Finish with Petrowrap Overwrap D applied like Petrowrap Tape to prevent mechanical damage as required.

Office Address

Innovative Manufacturing Inc.
Marine Products Division
861 Derwent Way, Delta, BC,  Canada
V3M 5R4

Phone: 604-522-2811
Fax: 604-522-5141
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Contact Us

Adam Eweida, Director
This email address is being protected from spambots. You need JavaScript enabled to view it.
Phone: 604-876-0777

Toll Free: 1-888-467-7325
Fax: 604-876-4749